Results 1 to 5 of 5

Thread: QuickPwn 2.2.5 (2G, Win)

  1. #1
    Join Date
    Feb 2008
    Location
    18º24'N ~ 66º05'W
    Posts
    11,479
    Thanks
    503
    Thanked 1,251 Times in 854 Posts
    Downloads
    163
    Uploads
    738

    Default QuickPwn 2.2.5 (2G, Win)

    How to activate, jailbreak and unlock your 2G iPhone 2.2.1 using QuickPwn 2.2.5-2:

    Notes:
    1. You need to be running the latest iPhone 2.2.1. It is recommended that you perform a fresh restore in iTunes before beginning.
    2. Use a different sim during the procedure, other than the original sim that came with the iPhone. An original sim may receive an activation signal from the network and cause the unlock to not work.

    *The screenshots of this guide were created with version 2.2 of QuickPwn but the procedures are the same.

    Downloads:
    1. QuickPwn 2.2.5-2 (Win)

    2. iPhone 2.2.1 2G firmware

    *If you have previously updated or restored, you can pull the file from one of the following locations:
    • XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates
    • Vista: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
    3. Bootloaders 3.9 and 4.6

    .
    Step 1
    Launch QuickPwn 2.2.5-2



    Step 2
    Make sure your iPhone is on and is plugged in to the computer. Click the blue arrow to continue.



    Step 3
    Click the "Browse" button to navigate to the iPhone1,1_2.2.1 you downloaded.



    Step 4
    Select the appropriate file and click "Open".



    Step 5
    Once QuickPwn recognizes the correct file, a green check-mark will appear. Click the blue arrow to continue.



    Step 6
    Select the operations that you want QuickPwn to perform. Click the blue arrow to continue.



    Step 7
    If you chose to unlock, QuickPwn will prompt you to browse for the bootloader files.
    Click "Browse" for each and navigate to the appropriate file.



    Step 8
    Highlight the correct bootloader file and click "Open" for each.





    Step 9
    Once you have selected the bootloaders, you will see another green check-mark.



    Step 10
    Again, ensure that your iPhone is connected via usb and click the blue arrow to continue.



    Step 11
    Your phone will now go into Recovery Mode. Prepare yourself to hold down the "Home" button.



    Step 12
    You will be prompted to hold down the "Home" button for a total of 5 seconds.



    Step 13
    Do not let go of the "Home" button!
    You will be prompted to hold down the "Power" button with the "Home" button for a total of 10 seconds.



    Step 14
    Again, keep holding down the "Home" button while releasing the "Power" button.
    You will be prompted to continue holding down the "Home" button for a final 30 seconds.



    Step 15
    QuickPwn will now commence the jailbreaking process.



    Step 16
    QuickPwn will alert you when it has completed it's process and is successful.



    Step 17
    Wait for the iPhone to finish flashing, then it will reboot on it's own.



    Congratulations and enjoy!
    Last edited by chuckturner; 02-10-2009 at 08:18 PM.

  2. The Following 2 Users Say Thank You to maXimus For This Useful Post:

    nsandymary (01-30-2009),Prolevelz (01-09-2009)

  3. #2
    Join Date
    Feb 2008
    Location
    Louisville, KY / Terre Haute, IN
    Posts
    1,431
    Thanks
    16
    Thanked 164 Times in 132 Posts
    Downloads
    39
    Uploads
    9

    Default

    Guide updated to reflect latest firmware

  4. The Following 4 Users Say Thank You to MrBucket101 For This Useful Post:

    dabdoub_30 (01-30-2009),maXimus (01-30-2009),nsandymary (01-30-2009),Prolevelz (01-30-2009)

  5. #3
    Join Date
    Feb 2008
    Location
    18º24'N ~ 66º05'W
    Posts
    11,479
    Thanks
    503
    Thanked 1,251 Times in 854 Posts
    Downloads
    163
    Uploads
    738

    Default

    Updated again with QuickPwn 2.2.5!

  6. #4
    Join Date
    May 2008
    Location
    Atlanta, GA
    Posts
    2,469
    Thanks
    520
    Thanked 122 Times in 111 Posts
    Downloads
    56
    Uploads
    0

    Default

    thank you boss...your da man

  7. #5
    Join Date
    Feb 2008
    Location
    18º24'N ~ 66º05'W
    Posts
    11,479
    Thanks
    503
    Thanked 1,251 Times in 854 Posts
    Downloads
    163
    Uploads
    738

    Default

    Quote Originally Posted by nsandymary View Post
    thank you boss...your da man
    Always a pleasure!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •