PDA

View Full Version : Anybody have K1 Hardware Repair for Blink Keypad and white Screen?



Prolevelz
05-30-2008, 12:14 AM
Cause i have 2 here!!! 1 K1 is when you press power, keypad will blink only then when you press BL mode,.shows only white screen...

The other K1 is Good and i transfered the main board of the number 1 k1 to the (good K1) it still same!!! So meaning this would be a hardware problem.. And i have changed flex it is still same!

Any idea? Much appreciated!

Hey-man
05-30-2008, 05:08 PM
Yeah could be hardware problem but what happend when you connect to the pc???

Other thing that you could do is hard TP

Prolevelz
05-30-2008, 09:11 PM
pc can detect it...
i have flashed it two times still no luck!!!

young_floyd
06-01-2008, 09:43 AM
May be then its the LCD?? or try another flex.

Prolevelz
06-01-2008, 09:20 PM
May be then its the LCD?? or try another flex.


flex is good mate!!! and i have tried 2pcs also
still same!

vermsky
06-02-2008, 05:50 PM
Have you tried repairing the PDS?

Prolevelz
06-02-2008, 09:13 PM
yeah also!!! :D

young_floyd
06-09-2008, 07:01 PM
flex is good mate!!! and i have tried 2pcs also
still same!

Well this happened to me once, if you open the k1 lcd housing youŽll see that this (lcd) is conected to a little "board", in my case it was damaged I just changed it and got it ready.

Hope this helps.

Prolevelz
06-09-2008, 09:26 PM
Well that would be a great hint!!!
cool....